Water in a Bumblebee house is often found late. The building may have been closed since autumn, and the first person through the door finds the evidence — a stain, a swollen baseboard, a puddle that has long since stopped spreading.
Trace it, do not guess
The relief-valve discharge is the first place to look, then the drain at the bottom, then the connections at the top. On an electric unit, an element gasket. On a gas unit, the tank's own seams and fittings.
Water runs downhill and along whatever it can follow, so the puddle's position says little about the source.
The freeze leak
A split line or fitting above the heater is the local pattern: it froze in January, held until the thaw, and let go. By the time it is found, the repair is plumbing as much as it is the heater.
The prevention is not clever. Drain what will freeze before the building is left, and make sure the main shut-off can actually be closed by whoever arrives first.
What can be fixed
Fittings, unions, the drain valve, element gaskets, the relief valve and its piping. Each is a part with a defined failure, and replacing it ends the leak.
A tank that weeps at a seam or through the shell is a different case. No patch holds on a corroded tank, and a repair attempt is money spent delaying the replacement.
The relief valve is a symptom
When the T&P valve discharges, it is doing its job. The question is why it was asked to: over-pressure, over-temperature, or a valve too old to seat.
Replacing the valve without that check is how the same call comes back.
Beyond the heater
Weeks of slow water in a closed house reaches subfloor, insulation and framing. Drying that out is part of the job, and on a property that is only visited seasonally, it is usually the larger part.