A replacement in Bumblebee is planned backwards from the driveway. Everything needed for the job is loaded before the truck leaves, because the nearest supplier is down the hill and the day is short in winter.
Why the trip matters
The physical swap of one storage tank for another is a few hours of work. What turns it into a two-day job is a part that was not on the truck: a dielectric union, a pan fitting, the right vent adapter.
That is why the assessment visit and the replacement are treated as separate steps when the installation is unfamiliar.
What the code adds
The heater is inspected as a new installation, so an older cabin tends to gain items it never had. A pan with a discharge that goes somewhere harmless. Seismic strapping. Relief-valve piping that ends where it should. Combustion air if the closet is closed. Venting that meets the current standard.
Under the 2025 California Building Standards Code these are inspection items, not optional extras, and they apply regardless of what the previous heater got away with.
Same size or a change
Staying with the same capacity and fuel is the low-risk answer, and it is right when the old unit met the demand. Where the house's use has changed, or the old unit was undersized, the replacement is the moment to fix it — differently sized, or a different type entirely.
Moving to tankless is a larger project: gas line, venting, electrical capacity, and a conversation about whether the building suits it.
The paperwork
The county permit is filed online with the Building Division in Sonora, and the inspection booked through the county's inspection line. On a road the county does not plow, the inspection date is worth choosing with the weather in mind rather than assuming any day will do.
The day itself
Water off, unit isolated, old heater out, new one set, connections made, pan and strapping in, vent checked, then fill and test. The last step is the one that catches leaks, and it is not skipped to save an hour.