The most valuable maintenance visit in Dardanelle happens before the road closes. Everything after that is discovery: a leak, a frozen fitting, a split tank. Discovery in spring costs more than prevention in autumn.
The shutdown
A building that will sit empty through a closed-road winter needs its water system left in a state that survives it. That means shutting the heater down as its manufacturer specifies, isolating it, and dealing with the lines that will see freezing temperatures.
The details differ by unit: some want the tank full with the gas off, others want it drained. Following the label is not pedantry. The wrong choice is how a tank becomes a split tank.
Why the tank suffers when nobody is there
Two things happen in an empty building. Water sits still, so sediment settles hard and scale bonds to the heat-transfer surfaces. And any small leak, whether a weeping relief valve or a tired fitting, runs unchecked for months.
Neither is visible from outside. Both are cheap to catch in autumn and expensive to find in spring.
Flushing and the anode
Where the supply is a well, flushing is set by what comes out of the drain rather than by a calendar. Pulling the anode and looking at it tells you more about the tank's remaining life than the date on the label.
Replacing a rod is one of the few jobs here that costs little and buys real time.
The vent, before the snow
A flue termination that will be under snow is a hazard that shows up as spillage, a pilot that will not hold, or soot on the draft hood. Checking it before the season is the only opportunity to change it.
Reopening
The first visit of the season should look at the base of the tank, the relief valve and discharge, and the vent before the heater is relied on. Then run it and watch. Ten minutes of looking beats a weekend of mopping.